Product Introduction
• Tonhe TH48T75NZ-S is a digital 1U telecom rectifier module with rated output 53.5VDC 75A, rated power 4000W.
• It converts wide-range AC input into stable adjustable 42–58V DC power, specially designed for telecom 48V DC power systems.
• Adopts full digital LLC soft-switching topology, featuring high efficiency and low heat generation.
• Supports hot-swap, automatic parallel current sharing and RS485 remote communication monitoring.
• Compact 1U rack structure, equipped with intelligent variable-speed fan cooling.
• Wide operating temperature and complete multi-protection design, suitable for indoor and outdoor telecom power cabinets.
• Tonhe (300491.SZ) has over 20 years of power electronics R&D and manufacturing experience, providing stable mass supply and global after-sales support.

Product Specifications
| Item |
Parameter |
| Model |
TH48T75NZ-S |
| Rated Power |
4000W |
| Rated Output |
53.5VDC / 75A |
| Output Voltage Range |
42 ~ 58VDC (adjustable by controller) |
| Input Voltage |
85–300VAC |
| Input Frequency |
45–66Hz (50/60Hz standard) |
| Power Factor |
≥0.99 (50%–100% load) |
| THD |
≤5% (50%–100% load) |
| Peak Efficiency |
97% |
| Ripple & Noise |
≤200mVp-p |
| Cooling |
Built-in fan, auto speed control |
| Dimension |
40.8 × 105 × 269 mm (1U) |
| Weight |
≤2.2kg |
| Protection |
Input over/under voltage, output overvoltage, overcurrent, short circuit, over-temperature, fan fault protection |
| Communication |
RS485 |
| Operating Temperature |
-40℃ ~ +75℃ |
| Storage Temperature |
-40℃ ~ +80℃ |
| Humidity |
5%–95% RH, non-condensing |
| Protection Grade |
IP20 |
Product Advantages
1. High Efficiency & Energy Saving
Peak efficiency up to 97%, low no-load power consumption ≤5W, effectively reduce long-term electricity cost for telecom sites.
2. Wide Input Voltage & Strong Grid Adaptability
85–300VAC wide input, stable operation under unstable grid, suitable for remote areas with poor power quality.
3. Hot Swap + N+1 Redundancy Supported
Online hot-swap design; single faulty module can be replaced without shutting down the whole DC system. Multiple modules parallel with automatic current sharing, easy to build N+1 redundant power system to avoid power outage.
4. Digital Intelligent Monitoring
RS485 communication interface, real-time upload voltage, current, temperature and fault alarm data, compatible with telecom power monitoring unit, convenient for remote O&M.
5. 1U Compact Rack Design
Standard 1U height, light weight, high power density, save cabinet space and easy installation and maintenance.
6. Full Protection & High Reliability
Multiple built-in protection functions, strict aging test before delivery, wide temperature adaptability for outdoor and indoor telecom cabinets.

Application Scenarios
• 5G / 4G outdoor & indoor base station power cabinets
• Telecom central office, access network communication power system
• Edge data center, small HVDC DC power system
• Lithium battery / lead-acid battery charging and backup power
• Railway communication, industrial monitoring, optical transmission equipment power supply
• Renewable energy hybrid off-grid telecom power stations

Export Cases
Tonhe 48V rectifier modules have been exported to more than 30 countries covering Southeast Asia, Middle East, South Asia, Russia and Eastern Europe.
Typical Case: Southeast Asia 5G Base Station Expansion Project
A local telecom system integrator purchased bulk TH48T75NZ-S modules for hundreds of outdoor remote 5G sites. The local grid fluctuates frequently and the site ambient temperature is high. We supplied wide-voltage rectifiers with N+1 redundant configuration, provided full test reports, Form E certificate and remote commissioning guidance. After deployment, modules run stably under high temperature and unstable grid conditions, low failure rate. The project was finished on schedule and generated repeat orders for subsequent network upgrade batches.


FAQ
Q1: Can this 48V 75A rectifier module work in parallel?
A: Yes. It supports automatic current sharing. Multiple modules can be paralleled to expand power capacity and build N+1 redundant backup system for higher reliability.
Q2: Is hot swap available? Can I replace it without power off?
A: Yes. Hot-swap design. You can pull out and replace the faulty module online, no need to shut down the whole 48V DC power system.
Q3: What certificates and documents can you provide for customs clearance?
A: We can provide CE, factory test report, CO, Form E, commercial invoice, packing list. We can also support other certification documents according to your target country requirements.
Q4: Is the output voltage adjustable? Can it charge lithium batteries?
A: Output voltage range 42–58VDC, adjustable via monitoring unit. It supports lead-acid battery float charge and lithium battery charging when matched with proper BMS and controller settings.
Q5: What is the warranty period? Do you support technical support?
A: Standard warranty period is 2 years. We provide engineering technical support, remote commissioning guide, batch test data and after-sales service for overseas projects.